| 2/17/2011 |
Del Mar Electronics & Design Show (DMED)
Come join us at the Del Mar Electronics & Design Show at the Fair Grounds |
| 1/1/2011 |
Pacific Design & Manufacturing
Come join us at the Pacific Design & Manufacturing Show |
| 1/8/2009 |
Looking forward to 2009
As companies look forward to 2009 ... |
| 1/7/2009 |
Multi-Shot Molding Dept Expansion
More demand for specialty molding |
| 12/1/2008 |
Increased Tooling Capacity, Fall 2008
New Mitsubishi CNC EDM machine |
| 5/1/2007 |
Tim Curnutt to lead workshop at IMLCON07
The 15th Anual International In-Mold ... |
| 12/1/2006 |
’Twas the Night before Christmas
Distinctive Plastics Version of “’Twas the Night before Christmas” |
| 9/12/2006 |
DPI Develops Proprietary IMD Appliqué
New Chemical Resistant Metalic Appliques ... |
| 7/3/2006 |
NPE 2006 Results
The National Plastics Expedition was a smashing success |
| 6/19/2006 |
NPE 2006
Join us at NPE 2006 |
| 6/15/2006 |
Larger Capacity 2-shot Capabilities
Large Capacity 2-shot |
| 10/1/2005 |
Increased Multi-Shot Capacity
Due to customer demand, our need for capacity in the multi-shot molding division has increased sharply. |
| 6/15/2004 |
Robotic Demand
Increased Demand for Robotics |
| 3/1/2003 |
Added Vertical Rotary Capability
Distinctive Plastics has added to its specialty department the capability of Rotary Vertical injection molding. |
| 5/1/2002 |
Increased Vertical Capacity
DPI has recently increased its capacity in the specialty molding division. |
| 3/1/2002 |
New Fully Integrated 3-D Data stream. Spring 2002
Distinctive has found that the Fully Integrated 3-D Data Stream with Solidworks simplifies the process |
| 2/1/2002 |
High Speed Machining - Spring 2002
Distinctive adds High Speed Machining to the Tool Room |
| 8/3/2001 |
Tool Room facility Expansion, Fall 2001
Distinctive Plastics plans Tools Room Expansion |
| 3/1/2000 |
Open House and Multi-Shot Seminar, Spring 2000
Distinctive Plastics holds an Open House |
